Recommended procedure of using EliHeat

There are various grades of Eliheat which eliminate the preheating of the polymers effectively. These are listed below:

  • Eliheat for filled PP
  • Eliheat For HIPS
  • Eliheat For ABS
  • Eliheat for PVC
Preheating of polymers like ABS, HIPS, Nylon, Filled PP and PVC polymers before processing, is a major problem in plastic Industries, as it requires 3-4 hours of preheating in oven/hopper drier

Eliheat is a specially formulated additive to reduce/eliminate preheating during the processing of polymers.The diverse features and benefits of Eliheat are described on other pages of Eliheat.


Procedure to use EliHeat:

Step 1: Mix polymers into a tumbler.

Step 2: Add Eliheat to the mixture. Using Eliheat eliminates preheating and the process of mixing is reduced to 5-7 minutes.

Step 3: Transfer the ready mixture into the hopper and leave it for further processing.



Suggested precautions:
  • EliHeat™ is highly sensitive to atmosphere.
  • Ensure that the 1 kg packet is used immediately after opening. If the additive is left in the packet after use, close it tightly so that the material is airtight.
  • Do not keep the material mixed with EliHeat™ for more than four hours.
  • Keep the hopper driers off while using EliHeat™.